DVD Player Region-free Codes

Welcome On our pages you will find a lot of verified working unlock codes collected from many different sources.

Whilst we made every effort to ensure that the information contained inside these pages is both accurate and up-to-date, we take NO responsibility and accept no liability for any damage caused from applying these procedures as laid down on these pages.

Use them at your own risk!

DVD Player model: Zenith DVC2200

Code 1:

Power on the player with no disk in the drive.
Press "PAUSE" on the remote.
Enter "3 1 4 1 5 9" on the remote (the word CODE appears on the display).
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.).
Press "PAUSE" on the remote.
Power the player off and then back on.

To play any region disc in these players shown below simply follow these instructions.
Open the tray, place an R1 disc on it but don't close it.
On the remote press 0, 1, 2, 3, PLAY.
The tray should then close, if not close it, and the player is now completely region free.