DVD Player Region-free Codes

Welcome On our pages you will find a lot of verified working unlock codes collected from many different sources.

Whilst we made every effort to ensure that the information contained inside these pages is both accurate and up-to-date, we take NO responsibility and accept no liability for any damage caused from applying these procedures as laid down on these pages.

Use them at your own risk!

DVD Player model: JVC XV-511BK

Make sure there is no Disc in the tray.
Shut off the unit and unplug it from the AC outlet.
Press and Hold the "Play" and "Open/Close" keys, simultaneously on the player and not the remote control.
While holding these keys, plug the AC cord back into the outlet. (TEST and CPU ver# will appear on the display).
Press DVD Menu twice on the remote.
When the display reads 000 5858 use the up and down buttons to change the 000 to 02E.
Using the Left and Right arrow buttons, change the last four digits until they read 0000 for Region Free, 0101 for Region 1, 0202 for Region 2 or 0404 for Region 4.
Press Enter on the player.
Press Standby and wait 5 seconds.
Press Standby again.
Your player is now set to the region you requested.
If you find some titles do not play on the region 0 setting, you may have to hard select the appropriate region.